Free Drone Inspection
We fly a free 4K drone pass over your array — no cost, no commitment, about fifteen minutes.

Maricopa · Casa Grande · Greater Phoenix
Arizona dust and baked-on mineral spotting quietly cut what your array produces. We clean with water and soft brushes only — no chemicals, no pressure washers, no warranty risk.
Flat $10 per panel. A typical 20-panel home is $200.
Monsoon season loads the air with dust, and the light rain that follows usually isn’t heavy enough to rinse it away. It wets the dust instead, then evaporates in 110° heat and leaves mineral deposits bonded to the glass. That baked-on layer is far harder to remove than the dry dust was — and it’s the most common thing we find on Arizona rooftops.
If you live near open desert, farmland, or active construction, you’re getting a heavier dust load than the metro average. Maricopa and Pinal County homes sit in exactly that position.
You’ll see that number on a lot of solar cleaning websites. It isn’t true for Arizona. The research behind it comes from studies in the Middle East and India, where conditions are nothing like a Phoenix rooftop.
Here’s the real picture: across a full year, soiling costs the typical U.S. home a few percent of production. Where it actually hurts is the weeks after a dust storm, when losses spike into the double digits until someone cleans the glass. That’s a real cost worth fixing — it’s just not the emergency you’re being sold.
Figures reflect published soiling research from NREL and IEA-PVPS Task 13.
Our own array in Maricopa, photographed before and after a standard cleaning.
BeforeAccumulated dust and mineral spotting across the glass.
AfterSame array, cleaned with water and soft brushes only.
We fly a free 4K drone pass over your array — no cost, no commitment, about fifteen minutes.
We review condition and roof access with you, then quote the exact price before any work starts.
Water and soft brushes only. We walk you through what we found before we leave.
Based in Maricopa, serving Pinal County and the greater Phoenix metro.
Not listed? Call or text (602) 688-4204 — if we can get to you, we’ll tell you straight, and if we can’t we’ll say so.
Panel cleaning recovers a few percent. Moving your heavy loads out of your utility’s peak window routinely beats that — and which plan you’re on depends on whether you’re served by ED3, APS, SRP, or the City of Mesa. Our one-hour on-site consultation goes through your actual bill and builds a plan around it.
See what the consultation covers →Twice a year covers most Arizona homes. If you are near open desert, farmland, or active construction, three to four times a year is more realistic. The honest answer is that it depends on what is upwind of you, which is part of what the free drone inspection tells us.
Not the way people expect, and in Arizona it can make things worse. Monsoon season loads the air with dust, and the light rain that often follows does not have the volume to rinse it off. Instead it wets the dust, then evaporates in the heat and leaves mineral deposits bonded to the glass. That baked-on layer is harder to remove than the dry dust was, and it is the single most common thing we find on Arizona arrays.
Less than most companies will tell you. Across a normal year, soiling costs the typical U.S. home somewhere in the low single digits as a percentage of production. Where it genuinely bites is the stretch after a dust storm, when losses spike well into the double digits until the panels are cleaned. We would rather give you the real number than a scary one.
Not the way we do it. Most panel warranties exclude damage from pressure washing, abrasive pads, and chemical cleaners. We use water and soft brushes only, which is the method manufacturers generally specify. If you have your warranty paperwork handy we are happy to look at it with you.
No to both. Water and soft brushes, nothing else. No detergents, no solvents, no pressure washing. Chemicals leave residue that attracts more dust, and pressure washing risks forcing water past the panel seals.
A flat $10 per panel. A typical 20-panel home is $200. That is the whole price for a standard residential job — we quote it up front and we do not add fees after the fact. Unusual roof access can change it, which is exactly why we fly the drone before quoting rather than after.
We fly a DJI Mini 3 over your array and capture 4K footage of every panel. You see the actual condition of your system — soiling, debris, discoloration, damage, anything shifted or lifted. It is free, it takes about fifteen minutes, and there is no obligation to book a cleaning afterward. It is also how we scope the job accurately.
Yes. We need you present to grant access and to confirm we can use an outdoor water spigot. It also means we can walk you through what we found on the roof before we leave, which is usually the most useful part of the visit.
Questions or ready to schedule? Reach us directly.
No cost, no commitment. See the actual condition of your array before you decide anything.
Get My Free Drone Inspection